PFERD
Abrasive Discs - Diamond Abrasive Discs - Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® diamond abrasive discs are perfect for working on wear-resistant platings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide etc.
Particularly recommended for work on materials used for engine construction e.g. Hastelloy, Inconel, titanium and titanium alloys. Also suitable for work on extremely hard materials such as tungsten carbide, glass, ceramic, enamel, stone and GRP/CRP.
Diamond Abrasive Discs:
COMBIDISC® diamond abrasive discs are perfect for working on wear-resistant platings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide etc.
| EDP | Diameter (Inches) | Grade | Recom. Speed RPM |
| 40655 | 1 | Coarse | 7,500 - 15,000 |
| 40656 | 1 | Medium | 7,500 - 15,000 |
| 40657 | 1 | Fine | 7,500 - 15,000 |
| 40658 | 1-1/2 | Coarse | 5,000 - 12,000 |
| 40659 | 1-1/2 | Medium | 5,000 - 12,000 |
| 40660 | 1-1/2 | Fine | 5,000 - 12,000 |
| 40661 | 2 | Coarse | 3,800 - 9,500 |
| 40662 | 2 | Medium | 3,800 - 9,500 |
| 40663 | 2 | Fine | 3,800 - 9,500 |
| 40664 | 3 | Coarse | 2,500 - 6,300 |
| 40665 | 3 | Medium | 2,500 - 6,300 |
| 40666 | 3 | Fine | 2,500 - 6,300 |