Abrasive Discs - Zirconium Alumina Z - Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® abrasive discs with zirconia alumina Z grain are suitable for use on all metals. These tools perform particularly well in coarse grinding applications.
Zirconium Alumina Z:
COMBIDISC® abrasive discs with zirconia alumina Z grain are suitable for use on all metals.
|EDP||Diameter (Inches)||Grit||Recom. Speed RPM|
|42593||2||36||8,000 - 13,000|
|42595||2||50||8,000 - 13,000|
|42596||2||60||8,000 - 13,000|
|42597||2||80||8,000 - 13,000|
|42600||3||36||5,000 - 9,000|
|42602||3||50||5,000 - 9,000|
|42603||3||60||5,000 - 9,000|
|42604||3||80||5,000 - 9,000|