PFERD

 COMBIDISC® PNER Unitized Discs - Type CDR

COMBIDISC® PNER Unitized Discs - Type CDR

COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.

COMBIDISC® PNER unitized discs are used for fine grinding on angle die grinders. The CD or CDR fastening elements are bonded to the unitized fleece. They are particularly suitable for working smaller and medium-sized areas on stainless steel (INOX) components.

COMBIDISC® PNER Unitized Discs:

EDP Diameter x Thickness (Inches) Abrasive Grit Grade Density Spec. Recom. RPM Max. RPM
48450 2 x 1/4 Silicon Carbide Fine W Soft 2SF 9,500 19,100
48451 2 x 1/4 Aluminum Oxide Coarse W Soft 2AM 9,500 19,100
48454 2 x 1/4 Silicon Carbide Fine MH Medium-Hard 6SF 9,500 19,100
48455 2 x 1/4 Aluminum Oxide Fine MH Medium-Hard 6AF 9,500 19,100
48458 2 x 1/4 Aluminum Oxide Medium H Hard 8AM 9,500 19,100
48459 2 x 1/4 Aluminum Oxide Coarse H Hard 8AC 9,500 19,100
48460 3 x 1/4 Silicon Carbide Fine W Soft 2SF 6,400 12,500
48461 3 x 1/4 Aluminum Oxide Medium W Soft 2AM 6,400 12,500
48464 3 x 1/4 Silicon Carbide Fine MH Medium-Hard 6SF 6,400 12,500
48465 3 x 1/4 Aluminum Oxide Fine MH Medium-Hard 6AF 6,400 12,500
48468 3 x 1/4 Aluminum Oxide Medium H Hard 8AM 6,400 12,500
48469 3 x 1/4 Aluminum Oxide Coarse H Hard 8AC 6,400 12,500