PFERD

POLINOX® PNK Convolute Wheels - Convolute Wheels

Non-woven abrasives are used when other tools reach their finishing limits or cannot achieve the required result. The low aggressive characteristics of the polyamide fibres and the positive effect of the abrasive non-woven materials create brilliant smooth finished surfaces.

The non-woven abrasive material of PFERD convolute wheels is wrapped around a core and enclosed in foam. The foam packing supports the non-woven fleece and controls its service life and grinding behaviour. Excellent for edge rounding, and matte finishing of planar surfaces.

POLINOX™ PNK Convolute Wheels:

EDP	Diameter x Width (Inches)	Arbor Hole	Abrasive	Grit	Grade	Density	Spec.	Recom. RPM	Max. RPM
48200	6x1/2	1	Silicon Carbide	Fine	MW	7	7SF	2,500	5,100
48202	6x1/2	1	Silicon Carbide	Fine	MH	8	8SF	2,500	5,100
48203	6x1/2	1	Silicon Carbide	Fine	H	9	9SF	2,500	5,100
48201	6x1/2	1	Aluminum Oxide	Coarse	MH	8	8AM	2,500	5,100
48204	6x1	1	Silicon Carbide	Fine	MW	7	7SF	2,500	5,100
48206	6x1	1	Silicon Carbide	Fine	MH	8	8SF	2,500	5,100
48207	6x1	1	Silicon Carbide	Fine	H	9	9SF	2,500	5,100
48205	6x1	1	Aluminum Oxide	Coarse	MH	8	8AM	2,500	5,100
48208	8x1/2	3	Silicon Carbide	Fine	MW	7	7SF	1,900	3,850
48210	8x1/2	3	Silicon Carbide	Fine	MH	8	8SF	1,900	3,850
48211	8x1/2	3	Silicon Carbide	Fine	H	9	9SF	1,900	3,850
48209	8x1/2	3	Aluminum Oxide	Coarse	MH	8	8AM	1,900	3,850
48212	8x1	3	Silicon Carbide	Fine	MW	7	7SF	1,900	3,850
48214	8x1	3	Silicon Carbide	Fine	MH	8	8SF	1,900	3,850
48215	8x1	3	Silicon Carbide	Fine	H	9	9SF	1,900	3,850
48213	8x1	3	Aluminum Oxide	Coarse	MH	8	8AM	1,900	3,850
48216	8x2	3	Silicon Carbide	Fine	MW	7	7SF	1,900	3,850
48218	8x2	3	Silicon Carbide	Fine	MH	8	8SF	1,900	3,850
48219	8x2	3	Silicon Carbide	Fine	H	9	9SF	1,900	3,850
48217	8x2	3	Aluminum Oxide	Coarse	MH	8	8AM	1,900	3,850