Next

PFERD

POLISTAR-TUBE

POLISTAR-TUBE

POLISTAR-TUBE is made up of several layers of grinding stars riveted together. POLISTAR-TUBE grinding stars are used especially for working the inside surfaces of pipes and pipe bends. The grinding stars may be used with ¼” shank drive arbors or with PFERD’s flexible shafts.

POLISTAR-TUBE is ideal for:

  • step-by-step cleaning and finishing of inner surfaces and pipe bends
  • rounding off pipe ends and deburring bore holes
  • use in straight pipes and deep bore holes. (With this application the stars are used with drive arbors.)

Advantages

  • Extremely flexible
  • Very high-quality surface finishes up to Ra 0.2 µm can be achieved.

Recommendation for Use
The following pipe inner diameters can be worked using different diameters:

  • 2” diameter stars for inner pipe dia. 1-3/8” - 1-5/8”
  • 2-1/4” diameter stars for inner pipe dia. 1-5/8” - 1-3/4”
  • 2-3/4” diameter stars for inner pipe dia. 1-3/4” - 2”
  • 3-1/8” diameter stars for inner pipe dia. 2” - 2-1/4”
  • 3-1/2” diameter stars for inner pipe dia. 2-1/4” - 2-3/8”
  • 4” diameter stars for inner pipe dia. 2-3/8” - 2-5/8”

The different grit sizes can be used to achieve the following roughness values:

  • Grit size 60 = 1.0 - 1.3 µm Ra
  • Grit size 120 = 0.6 - 1.0 µm Ra
  • Grit size 180 = 0.4 - 0.6 µm Ra
  • Grit size 240 = 0.3 - 0.4 µm Ra
  • Grit size 320 = 0.2 - 0.3 µm Ra

To prevent corrosion forming on stainless steel (INOX) pipes, POLISTAR-TUBE is made using stainless steel rivets.

EDP Diameter (Inches) Bore (mm) Grit No. of Layers Recom. Speed RPM Max. RPM Suitable Arbor For Inner Pipe ID
44015 2 4 60 4 3,000 7,650 edp 44062 1-3/8" - 1-5/8"
44016 2 4 120 6 3,000 7,650 edp 44062 1-3/8" - 1-5/8"
44017 2 4 180 6 3,000 7,650 edp 44062 1-3/8" - 1-5/8"
44018 2 4 240 6 3,000 7,650 edp 44062 1-3/8" - 1-5/8"
44019 2 4 320 6 3,000 7,650 edp 44062 1-3/8" - 1-5/8"
44020 2-1/4 4 60 4 2,500 6,350 edp 44062 1-5/8" - 1-3/4"
44021 2-1/4 4 120 6 2,500 6,350 edp 44062 1-5/8" - 1-3/4"
44022 2-1/4 4 180 6 2,500 6,350 edp 44062 1-5/8" - 1-3/4"
44023 2-1/4 4 240 6 2,500 6,350 edp 44062 1-5/8" - 1-3/4"
44024 2-1/4 4 320 6 2,500 6,350 edp 44062 1-5/8" - 1-3/4"
44025 2-3/4 4 60 4 2,200 5,450 edp 44062 1-3/4" - 2"
44026 2-3/4 4 120 6 2,200 5,450 edp 44062 1-3/4" - 2"
44027 2-3/4 4 180 6 2,200 5,450 edp 44062 1-3/4" - 2"
44028 2-3/4 4 240 6 2,200 5,450 edp 44062 1-3/4" - 2"
44029 2-3/4 4 320 6 2,200 5,450 edp 44062 1-3/4" - 2"
44030 3-1/8 4 60 4 1,900 4,750 edp 44062 2" - 2-1/4"
44031 3-1/8 4 120 6 1,900 4,750 edp 44062 2" - 2-1/4"
44032 3-1/8 4 180 6 1,900 4,750 edp 44062 2" - 2-1/4"
44033 3-1/8 4 240 6 1,900 4,750 edp 44062 2" - 2-1/4"
44034 3-1/8 4 320 6 1,900 4,750 edp 44062 2" - 2-1/4"
44035 3-1/2 5 60 4 1,700 4,250 edp 44063 2-1/4" - 2-3/8"
44036 3-1/2 5 120 8 1,700 4,250 edp 44063 2-1/4" - 2-3/8"
44037 3-1/2 5 180 8 1,700 4,250 edp 44063 2-1/4" - 2-3/8"
44038 3-1/2 5 240 8 1,700 4,250 edp 44063 2-1/4" - 2-3/8"
44039 3-1/2 5 320 8 1,700 4,250 edp 44063 2-1/4" - 2-3/8"
44040 4 5 60 4 1,500 3,820 edp 44063 2-3/8" - 2-5/8"
44041 4 5 120 8 1,500 3,820 edp 44063 2-3/8" - 2-5/8"
44042 4 5 180 8 1,500 3,820 edp 44063 2-3/8" - 2-5/8"
44043 4 5 240 8 1,500 3,820 edp 44063 2-3/8" - 2-5/8"
44044 4 5 320 8 1,500 3,820 edp 44063 2-3/8" - 2-5/8"