PFERD
Universal Line PSF - A P PSF-INOX for stainless steel - Type 1 (Flat)
Providing fast cutting performance and good service life with low heat generation, these wheels are recommended for general purpose cutting of stainless steel.
- Abrasive: Aluminum Oxide A
- INOX-rated: Manufactured without addition of ferrous, sulphurous or chlorinated fillers.
- Workpiece Materials: Stainless steel (INOX)
- Application: Cutting of sheet metal, sectional and solid materials
- Recommendation for Use:
- .040”, .045” thickness for fast, convenient cutting with minimized burr formation.
- 3/32” thickness for universal cut-off applications.
| EDP | Diameter (Inches) | Thickness (Inches) | Thickness (mm) | Arbor Hole | Grit | Max. RPM |
| 63540 | 4-1/2 | .040 | 1.0 | 7/8 | 60 | 13,300 |
| 63545 | 4-1/2 | .040 | 1.2 | 7/8 | 60 | 13,300 |
| 63550 | 4-1/2 | .045 | 1.6 | 7/8 | 46 | 13,300 |
| 63557 | 4-1/2 | .045 | 1.8 | 7/8 | 46 | 13,300 |
| 63563 | 4-1/2 | 3/32 | 2.4 | 7/8 | 24 | 13,300 |
| 63541 | 5 | .040 | 1.0 | 7/8 | 60 | 12,200 |
| 63546 | 5 | .040 | 1.2 | 7/8 | 60 | 12,200 |
| 63551 | 5 | .045 | 1.6 | 7/8 | 46 | 12,200 |
| 63558 | 5 | .045 | 1.8 | 7/8 | 46 | 12,200 |
| 63564 | 5 | 3/32 | 2.4 | 7/8 | 24 | 12,200 |
| 63552 | 6 | .045 | 1.6 | 7/8 | 46 | 10,200 |
| 63559 | 6 | .045 | 1.8 | 7/8 | 46 | 10,200 |
| 63553 | 7 | .045 | 1.6 | 7/8 | 46 | 8,600 |
| 63566 | 7 | 3/32 | 2.4 | 7/8 | 24 | 8,600 |
| 63554 | 9 | .045 | 1.9 | 7/8 | 46 | 6,600 |
| 63567 | 9 | 3/32 | 2.4 | 7/8 | 24 | 6,600 |