PFERD

 Performance Line SG - POLIFAN SG A - Conical (PFC - Type 29)

Performance Line SG - POLIFAN SG A - Conical (PFC - Type 29)

Premium POLIFAN SG flap discs manufactured with Aluminum Oxide coated material offer high stock removal and extended service life. Effective on angle grinders of all power output levels.

  • Abrasive: Aluminum Oxide
  • Grit sizes: 24, 40, 60, 80, 120
  • INOX-rated: Free of iron, sulphur and chlorinated fillers; suitable for use on stainless steel (INOX)
  • Workpiece Materials: Steel, stainless steel (INOX), plastics, wood
  • Application: Surface grinding, edge grinding
  • Recommendation for Use: Achieves very high stock removal rates even at low contact pressure.
EDP Diameter (Inches) Arbor Hole / Thread Size Grit Max. RPM
62201 4-1/2 7/8 A.H. 24 13,300
62301 4-1/2 5/8-11 Thread 24 13,300
62202 4-1/2 7/8 A.H. 40 13,300
62302 4-1/2 5/8-11 Thread 40 13,300
62203 4-1/2 7/8 A.H. 60 13,300
62303 4-1/2 5/8-11 Thread 60 13,300
62204 4-1/2 7/8 A.H. 80 13,300
62304 4-1/2 5/8-11 Thread 80 13,300
62205 4-1/2 7/8 A.H. 120 13,300
62305 4-1/2 5/8-11 Thread 120 13,300
62212 5 7/8 A.H. 24 12,200
62312 5 5/8-11 Thread 24 12,200
62213 5 7/8 A.H. 40 12,200
62313 5 5/8-11 Thread 40 12,200
62214 5 7/8 A.H. 60 12,200
62314 5 5/8-11 Thread 60 12,200
62215 5 7/8 A.H. 80 12,200
62315 5 5/8-11 Thread 80 12,200
62216 5 7/8 A.H. 120 12,200
62316 5 5/8-11 Thread 120 12,200
62217 6 7/8 A.H. 40 10,200
62358 6 5/8-11 Thread 40 10,200
62218 6 7/8 A.H. 60 10,200
62359 6 5/8-11 Thread 60 10,200
62219 6 7/8 A.H. 80 10,200
62360 6 5/8-11 Thread 80 10,200
62227 6 7/8 A.H. 120 10,200
62368 6 5/8-11 Thread 120 10,200
62207 7 7/8 A.H. 24 8,600
62307 7 5/8-11 Thread 24 8,600
62208 7 7/8 A.H. 40 8,600
62308 7 5/8-11 Thread 40 8,600
62209 7 7/8 A.H. 60 8,600
62309 7 5/8-11 Thread 60 8,600
62210 7 7/8 A.H. 80 8,600
62310 7 5/8-11 Thread 80 8,600
62211 7 7/8 A.H. 120 8,600
62311 7 5/8-11 Thread 120 8,600