Previous
Next

PFERD

Performance Line SG - POLIFAN SG A - Flat (PFF- Type 27)

Performance Line SG - POLIFAN SG A - Flat (PFF- Type 27)

Premium POLIFAN SG flap discs manufactured with Aluminum Oxide coated material offer high stock removal and extended service life. Effective on angle grinders of all power output levels.

  • Abrasive: Aluminum Oxide
  • Grit sizes: 24, 40, 60, 80, 120
  • INOX-rated: Free of iron, sulphur and chlorinated fillers; suitable for use on stainless steel (INOX)
  • Workpiece Materials: Steel, stainless steel (INOX), plastics, wood
  • Application: Surface grinding, edge grinding
  • Recommendation for Use: Achieves very high stock removal rates even at low contact pressure.
EDP Diameter (Inches) Arbor Hole / Thread Size Grit Max. RPM
62140 4 5/8 A.H. 40 15,300
62141 4 3/8-24 Thread 40 15,300
62142 4 5/8 A.H. 60 15,300
62143 4 3/8-24 Thread 60 15,300
62144 4 5/8 A.H. 80 15,300
62145 4 3/8-24 Thread 80 15,300
62146 4 5/8 A.H. 120 15,300
62147 4 3/8-24 Thread 120 15,300
62149 4-1/2 7/8 A.H. 24 13,300
62257 4-1/2 5/8-11 Thread 24 13,300
62150 4-1/2 7/8 A.H. 40 13,300
62250 4-1/2 5/8-11 Thread 40 13,300
62152 4-1/2 7/8 A.H. 60 13,300
62252 4-1/2 5/8-11 Thread 60 13,300
62154 4-1/2 7/8 A.H. 80 13,300
62254 4-1/2 5/8-11 Thread 80 13,300
62156 4-1/2 7/8 A.H. 120 13,300
62256 4-1/2 5/8-11 Thread 120 13,300
62158 5 7/8 A.H. 40 12,200
62258 5 5/8-11 Thread 40 12,200
62160 5 7/8 A.H. 60 12,200
62260 5 5/8-11 Thread 60 12,200
62162 5 7/8 A.H. 80 12,200
62262 5 5/8-11 Thread 80 12,200
62164 5 7/8 A.H. 120 12,200
62264 5 5/8-11 Thread 120 12,200
62166 7 7/8 A.H. 24 8,600
62266 7 5/8-11 Thread 24 8,600
62168 7 7/8 A.H. 40 8,600
62268 7 5/8-11 Thread 40 8,600
62170 7 7/8 A.H. 60 8,600
62270 7 5/8-11 Thread 60 8,600
62172 7 7/8 A.H. 80 8,600
62272 7 5/8-11 Thread 80 8,600
62174 7 7/8 A.H. 120 8,600
62274 7 5/8-11 Thread 120 8,600