Previous
Next

PFERD

Performance Line SG - POLIFAN SG ZA - Flat (PFF- Type 27)

Performance Line SG - POLIFAN SG ZA - Flat (PFF- Type 27)

he new POLIFAN® SG ZA offers all the advantages of Zirconia grain while eliminating common user problems. Type SG ZA is designed with Zirconia grain for high stock removal rates and long tool life. And, it is blended with Aluminum Oxide grain to reduce risk of glazing. It is the ideal flap disc for weld removal and surface grinding on Stainless Steel, even on moderate to low power angle grinders.

  • Abrasive: Zirconia Alumina / Aluminum Oxide ZA
  • Grit sizes: 24, 40, 60, 80
  • Workpiece Materials: Stainless steel (INOX)
  • Application: Surface grinding, weld removal
  • Recommendation for Use: The high-performance abrasive Zirconia Alumina retains its good cutting qualities particularly during surface grinding on stainless steel (INOX) and does not glaze.
  • Recommended for angle grinders of all power output levels.
EDP Diameter (Inches) Arbor Hole / Thread Size Grit Max. RPM
60890 4 7/8 A.H. 40 15,300
60920 4 3/8-24 Thread 40 15,300
60891 4 7/8 A.H. 60 15,300
60921 4 3/8-24 Thread 60 15,300
60892 4 7/8 A.H. 80 15,300
60922 4 3/8-24 Thread 80 15,300
60895 4-1/2 7/8 A.H. 40 13,300
60925 4-1/2 5/8-11 Thread 40 13,300
60897 4-1/2 7/8 A.H. 60 13,300
60927 4-1/2 5/8-11 Thread 60 13,300
60898 4-1/2 7/8 A.H. 80 13,300
60928 4-1/2 5/8-11 Thread 80 13,300
60902 5 7/8 A.H. 40 12,200
60932 5 5/8-11 Thread 40 12,200
60904 5 7/8 A.H. 60 12,200
60934 5 5/8-11 Thread 60 12,200
60905 5 7/8 A.H. 80 12,200
60935 5 5/8-11 Thread 80 12,200
60914 7 7/8 A.H. 24 8,600
60944 7 5/8-11 Thread 24 8,600
60916 7 7/8 A.H. 40 8,600
60946 7 5/8-11 Thread 40 8,600
60918 7 7/8 A.H. 60 8,600
60948 7 5/8-11 Thread 60 8,600
60919 7 7/8 A.H. 80 8,600
60949 7 5/8-11 Thread 80 8,600