Previous
Next

PFERD

Performance Line SG - POLIFAN SG ZIRKON - Conical (PFC - Type 29)

Performance Line SG - POLIFAN SG ZIRKON - Conical (PFC - Type 29)

The high end Zirconia coated material PFERD uses to produce POLIFAN SG-ZIRKON offers the maximum efficiency in most demanding grinding applications. High stock removal rate and extended service life.

  • Abrasive: Zirconia Alumina Z
  • Grit sizes: 24, 36, 40, 60
  • INOX-rated: Free of iron, sulphur and chlorinated fillers; suitable for use on stainless steel (INOX)
  • Workpiece Materials: Steel, stainless steel (INOX)
  • Application: Weld grinding, edge finishing
  • Recommendation for Use: Zirconia alumina grain is a high-performance abrasive medium delivering optimum performance on high-powered angle grinders at higher contact pressures and/or steeper work angles.
EDP Diameter (Inches) Arbor Hole / Thread Size Grit Max. RPM
62221 4-1/2 7/8 A.H. 24 13,300
62321 4-1/2 5/8-11 Thread 24 13,300
62191 4-1/2 7/8 A.H. 36 13,300
62194 4-1/2 5/8-11 Thread 36 13,300
62220 4-1/2 7/8 A.H. 80 13,300
62324 4-1/2 5/8-11 Thread 80 13,300
62259 4-1/2 7/8 A.H. 120 13,300
62275 4-1/2 5/8-11 Thread 120 13,300
62192 5 7/8 A.H. 36 12,200
62195 5 5/8-11 Thread 36 12,200
62261 5 7/8 A.H. 80 12,200
62291 5 5/8-11 Thread 80 12,200
62263 5 7/8 A.H. 120 12,200
62293 5 5/8-11 Thread 120 12,200
62193 7 7/8 A.H. 36 8,600
62196 7 5/8-11 Thread 36 8,600
62575 7 7/8 A.H. 80 8,600
62580 7 5/8-11 Thread 80 8,500
62576 7 7/8 A.H. 120 8,600
62581 7 5/8-11 Thread 120 8,500