PFERD

 Performance Line SG - POLIFAN SG ZIRKON - Flat (PFF- Type 27)

Performance Line SG - POLIFAN SG ZIRKON - Flat (PFF- Type 27)

The high end Zirconia coated material PFERD uses to produce POLIFAN SG-ZIRKON offers the maximum efficiency in most demanding grinding applications. High stock removal rate and extended service life.

  • Abrasive: Zirconia Alumina Z
  • Grit sizes: 24, 36, 40, 60
  • INOX-rated: Free of iron, sulphur and chlorinated fillers; suitable for use on stainless steel (INOX)
  • Workpiece Materials: Steel, stainless steel (INOX)
  • Application: Weld grinding, edge finishing
  • Recommendation for Use: Zirconia alumina grain is a high-performance abrasive medium delivering optimum performance on high-powered angle grinders at higher contact pressures and/or steeper work angles.
EDP Diameter (Inches) Arbor Hole / Thread Size Grit Max. RPM
62138 4 5/8 A.H. 40 15,300
62197 4 3/8-24 Thread 40 15,300
62139 4 5/8 A.H. 60 15,300
62198 4 3/8-24 Thread 60 15,300
62179 4-1/2 7/8 A.H. 24 13,300
62279 4-1/2 5/8-11 Thread 24 13,300
62173 4-1/2 7/8 A.H. 36 13,300
62273 4-1/2 5/8-11 Thread 36 13,300
62176 4-1/2 7/8 A.H. 40 13,300
62276 4-1/2 5/8-11 Thread 40 13,300
62178 4-1/2 7/8 A.H. 60 13,300
62278 4-1/2 5/8-11 Thread 60 13,300
62181 5 7/8 A.H. 36 12,200
62281 5 5/8-11 Thread 36 12,200
62182 5 7/8 A.H. 40 12,200
62282 5 5/8-11 Thread 40 12,200
62184 5 7/8 A.H. 60 12,200
62284 5 5/8-11 Thread 60 12,200
62187 7 7/8 A.H. 36 8,600
62287 7 5/8-11 Thread 36 8,600
62188 7 7/8 A.H. 40 8,600
62288 7 5/8-11 Thread 40 8,600
62190 7 7/8 A.H. 60 8,600
62290 7 5/8-11 Thread 60 8,600