PFERD

 Wheel Brushes - Wide Face Wheels - Silicon Carbide Grain (SiC)

Wheel Brushes - Wide Face Wheels - Silicon Carbide Grain (SiC)

Wide face M-BRAD™ wheels contain more fill material than narrow face version, providing faster cycle times and more aggressive deburring.

Ordering Note: 8” diameter wheels are supplied with adapter set K (EDP 84665). All 8” - 14” diameter wheels have a 2” arbor hole with 1/2” x 1/4” keyways.

EDP Diameter (Inches) Arbor Hole Filament Diameter Filament Material Grit Trim Length Face Width Rec. RPM Max. RPM
83689 3 5/8 .040 Nylon / Silicon Carbide 80 5/8 7/8 1,200 - 4,000 5,000
83690 3 5/8 .040 Nylon / Silicon Carbide 120 5/8 7/8 1,200 - 4,000 5,000
83691 3 5/8 .035 Nylon / Silicon Carbide 180 5/8 7/8 1,200 - 4,000 5,000
83692 3 5/8 .022 Nylon / Silicon Carbide 320 5/8 7/8 1,200 - 4,000 5,000
83693 4 5/8 .040 Nylon / Silicon Carbide 80 7/8 3/4 3,000 - 7,000 12,000
83694 4 5/8 .040 Nylon / Silicon Carbide 120 7/8 3/4 3,000 - 7,000 12,000
83695 4 5/8 .035 Nylon / Silicon Carbide 180 7/8 3/4 3,000 - 7,000 12,000
83696 4 5/8 .022 Nylon / Silicon Carbide 320 7/8 3/4 3,000 - 7,000 12,000
83699 6 2 .040 Nylon / Silicon Carbide 80 1-1/8 7/8 1,200 - 5,000 6,000
83700 6 2 .040 Nylon / Silicon Carbide 120 1-1/8 7/8 1,200 - 5,000 6,000
83701 6 2 .035 Nylon / Silicon Carbide 180 1-1/8 7/8 1,200 - 5,000 6,000
83702 6 2 .022 Nylon / Silicon Carbide 320 1-1/8 7/8 1,200 - 5,000 6,000
83703 8 2 .040 Nylon / Silicon Carbide 80 1-1/2 1 1,200 - 4,000 6,000
83704 8 2DK .040 Nylon / Silicon Carbide 120 1-1/2 1 1,200 - 4,000 4,500
83705 8 2DK .035 Nylon / Silicon Carbide 180 1-1/2 1 1,200 - 4,000 4,500
83706 8 2DK .022 Nylon / Silicon Carbide 320 1-1/2 1 1,200 - 4,000 4,500