TRUMPF
TKA 500
With the TruTool TKA 500, you can give components clean visible edges, break sharp edges, or apply a radius. All of this in a variety of angles and in just one operation. With the optional support plate, working in space restricted conditions is not a problem. You can quickly adjust the chamfer height and create chamfer lengths of up to 0.2 inches in 57,000 mild steel. The hold and guide handle, together with ideal machine dimensions, enables simple machine operation.
TruTool N 500
| |
---|---|
Maximum sheet thicknesses | |
Maximum sheet thickness, steel 400 N/mm² | 5 mm |
Maximum sheet thickness, steel 600 N/mm² | 3.2 mm |
Maximum sheet thickness, steel 800 N/mm² | 2.5 mm |
Maximum sheet thickness, aluminum up to 250 N/mm² | 7 mm |
Radii | |
Smallest radius | 90 mm |
General | |
Working speed | 1.5 m/min |
Stroke rate at nominal load | 815 1/min |
Starting hole diameter | 41 mm |
Nominal input power | 1700 W |
Weight | |
Weight without cable | 3.8 kg |