Air Hydraulic Pullsetter Direct Drive 1,000 RPM #8-1/2 Capacity
The Acu-Pull air hydraulic pullsetter tool provides a quick and easy way to install a threaded rivet nut in applications where a strong thread is required. Will work with most threaded rivet nut manufacturers.


  • 360° swivel air inlet for ease of use
  • Air motor stalls out upon reaching torque
  • BEST PRACTICE TIP: It is best to do some test pulls on scrap material in order to arrive at the optimal air pressure (torque) setting which gives the desired result. Start with a low air pressure (torque) setting and increase gradually, especially when pulling aluminum inserts. When the air pressure (torque) is set too high you risk stripping the thread on the insert.
  • Top-fill design allows the hydraulic cylinder to be refilled without disassembly
  • Torque adjusted by air pressure
  • Supplied with oil syringe and durable blow-molded case
  • Nose-piece assembly sold separately
Max. Capacity in. (mm) 1/2
Pulling Capacity lb (kg) 6,800 (3,084)
Throttle Style Trigger
Capacity in. (mm) #8 - 1/2 (M4 - M12)
Stroke Length in. (mm) 0.27 (7)
Style Pistol
Free Speed rpm 1,000
Length in. (mm) 11.33 (288)
Air Cons. cfm (cmm) 4.5 (0.12)
Noise Level dB(A) 71
Weight lbs (kgs) 6 (2.72)
Air Inlet (NPT) 1/4

Parts Breakdown