Pullsetter Adjustable Torque Control Clutch 400 RPM #10-3/8 Capacity
The Acu-Pull pullsetter tool provides a quick and easy way to install a threaded rivet nut in applications where a strong thread is required. Will work with most threaded rivet nut manufacturers.
- "Quick-Change" nose-piece assembly allows you to change the nose-piece size in less than 30 seconds.
Adjustable torque control clutch allows operation of the tool at full speed. The tool torque is adjusted according to the rivet nut being pulled. Once the preset torque is reached, the clutch activates
BEST PRACTICE TIP: It is best to do some test pulls on scrap material in order to arrive at the optimal air pressure (torque) setting which gives the desired result. Start with a low air pressure (torque) setting and increase gradually, especially when pulling aluminum inserts. When the air pressure (torque) is set too high you risk stripping the thread on the insert.
No air pressure regulating is required with Adjustable torque control models
Torque adjusted by internal clutch
Nose-piece assembly sold separately
|Capacity in. (mm)||#10 - 3/8 (M5 - M10)|
|Free Speed rpm||400|
|Length in. (mm)||10.1/8 (257)|
|Air Cons. cfm (cmm)||5 (0.14)|
|Noise Level dB(A)||70|
|Weight lbs (kgs)||3.1 (1.4)|
|Air Inlet (NPT)||1/4|