Seam Lockers & Fasteners

Super-fast sealing

For heating and ventilation engineers, TRUMPF seam lockers are essential for their daily work, as well as for the construction of façades, fireplace coverings or industrial fans. For both Pittsburgh lock seams as well as angle and standing seams, you will find the correct tool with TRUMPF.

  • Tight seam joints without force: The seam lockers operate with an automatic feed. This means you achieve a consistently high seam quality.
  • Comfortable operation: You can work quickly, and with low noise and vibration.
  • Faster and easier use: The seam lockers are ready for use in just a few steps; their handling is extremely simple.
  • Mobile use: You can use the seam lockers directly at the assembly point, even on mounted ducts.

 

TruTool F 300

TruTool F 300

TruTool F 300 The TruTool F 300 is ideal for closing Pittsburgh seams on straight or curved ducts. You can work quickly with the quiet roll/glide process and achieve a tight connection. The sheet thickness range for this is 0.03 inches to 0.05 inches for mild steel. The adjustment to the sheet thickness is automatic. Maximum Sheet Thickness in. .048 Minimum Sheet...

→ Read More

TruTool F 301

TruTool F 301

TruTool F 301 With the TruTool F 301, you can close Pittsburgh seams effortlessly on straight or curved ducts with sheet thicknesses of 0.45 mm – 1 mm for mild steel. There is no need for refitting when processing formed or folded pieces. The adjustment to the sheet thickness is automatic and the forward feed guarantees a consistent and tight...

→ Read More

TruTool F 140

TruTool F 140

TruTool F 140 With the TruTool F 140, Pittsburgh seams on straight or curved ducts with sheet thicknesses of 0.6 mm – 1.4 mm, can be closed with ease. The machine is also ideally suited to processing stainless steel. The TruTool F 140 adapts automatically to the sheet thickness. There is also no need for refitting when processing formed or...

→ Read More

TruTool F 125

TruTool F 125

TruTool F 125 The TruTool F 125 closes angle and standing seams with a spring-loaded hammer. This gives you tightly closed seams with consistent quality, even with variations in sheet thickness. The maximum seam height is 1.57 in. The free-standing tool allows you to work well even in tight corners and angles. Maximum Sheet Thickness in. .147 Minimum Sheet Thickness in....

→ Read More

TF 350

TruTool TF 350

TruTool TF 350 Joining is the simplest and most cost-effective way of connecting two or more metal parts. With the TruTool TF 350 you can produce a form-fitting material connection with joints that are easy to reproduce using cold forming. Whether the workpieces are coated or uncoated is irrelevant. The TruTool TF 350 joins overall material thicknesses of 0.8 mm to...

→ Read More